|
Arm and disarm with your factory remote control or remote key - no need to carry extra remote controls.
For many modern vehicles with CAN-bus wiring a CAN compatible alarm is the best choice for an alarm system and in some cases it is essential. The Falcon Predator CAN-bus alarm uses the vehicle manufacturers original remote control key to arm and disarm the alarm via the vehicles digital CAN-bus communication system - just lock the doors as normal and the alarm will be armed, no need for an extra remote control to carry around. By connecting into the vehicles digital CAN bus the installation is much simplified with only 6 essential wires to connect.
What is CAN-bus? CAN (Controller Area Network) is a digital signalling system used in many modern cars which brings many advantages such as reliability, advanced diagnosis and a decrease in cost and complexity for vehicle manufacturers. The down side for end users has been the added difficultly of installing aftermarket products such as an alarm, leading to increased installation time, higher risk of damaging the cars electronics and in some cases it simply isn't possible.
The Falcon Predator CAN-bus alarm is the solution! Connecting into the vehicles 1 or 2 wire CAN network the alarm can communicate directly with the high speed digital data eliminating the need for traditional hard wired analogue systems.
Compatible with models from the following the manufacturers*
Alfa Romeo, Audi, Chevrolet, Chrysler, Dodge, Citroen, Fiat, Ford, Honda, Iveco, Infiniti, Jeep, Kia, Lamborghini, Mazda, Mercedes, Mini, Mitsubishi, Opel, Peugeot, Porsche, Saab, Seat, Skoda, Subaru, Suzuki, Toyota, Vauxhall, VW, Volvo.
*Check full compatibility list to ensure you model & year is covered.
Vehicle Compatibility List (PDF)
PLEASE STATE YOUR CAR MODEL & YEAR IN THE COMMENTS BOX ON CHECKOUT SO WE CAN MAKE SURE YOUR ALARM HAS THE CORRECT FIRMWARE INSTALLED. If you don't we will send Firmware A, check the compatibility list for which vehicles this supports.
Please note some vehicles, notably Citroen, Fiat, Peugeot will require the alarm function to be turned on in the cars ECU by the dealer. The dealer may charge for this service.
Features:
- Alarm system for vehicles that already have remote central locking and CAN-bus wiring
- Compatible with 1 & 2 wire CAN-bus systems
- Upgradeable firmware for maximum compatibility
- Includes Loud 118dB six tone siren
- Operates from vehicles original remote control keys
- Includes dual stage shock sensor with warn away
- Silent Arm/Disarm Option
- Total Closure Facility (closes windows on vehicles with total closure)
- Output for separate window closure for vehicles without total closure
- Engine immobiliser
- Bypass input - temporarily disables shock sensor and ignition input
- Passive Arming arms alarm automatically (programmable option)
- Flashing Hazard Lights on arm/disarm/activation
- Temporary sensor bypass
- Valet mode to disable alarm functions
- Auto re-arm prevents accidental disarming (programmable option)
- High intensity blue Smart dashboard status LED
- Arm condition memory
- Defective Zone Bypass prevents false alarms
- Secure emergency override facility
- Door/boot/bonnet protection
Benefits of using a Falcon CAN-bus alarm:
- Compatible with all major CAN-bus cars
- Compatible with 1 & 2 wire CAN-bus systems
- Car type is configurable without need for PC
- Easy and quick to install - only 6 essential wires
- High reliability
- Uses the OEM keyless entry remote controls
Instructions
User Manual
Installation Manual
Vehicle Compatibility List (PDF)
|
